BC-1000 Industrial Float Battery Charger

Manufacturer
Eagle Eye
Product Type
Battery Chargers
Technology
Industrial SCR Chargers

PRODUCT DESCRIPTION

The BC-1000 is a stationary float battery charger designed for use in utility, switchgear, and other industrial environments. Nominal ratings include models at 24, 48, or 130 volts DC and 6 to 50 amps DC. Built-in alarms are included for high DC voltage, low DC voltage, positive and negative ground fault, and end of discharge. The industrial battery charger has digital controls and an LCD display. A number of safety features are included such as wire protection on all field terminals and full AC input and DC output protection. All BC-1000 units include a standard 5-year warranty.

  • Measurement Range: Voltmeter: 0 – 120%, Float Voltage: 2.00 V/C to 2.50 V/C, Equalize Voltage: 2.00 V/C to 2.50 V/C, High DC Voltage Alarm: 1.00 V/C to 2.70 V/C, Low DC Voltage Alarm: 1.00 V/C to 2.50 V/C, End of Discharge Voltage Alarm: 1.00 V/C to 2.00 V/C
  • Alarm Relay: Max Switching Voltage: 150 VDC, 125 VAC, Max. Switching Power: 30 WDC, 60 VA AC, Max. Switching Current: 2.0 A, Max. Carry Current: 2.0 A
  • Mounting: Wall, floor, shelf, EIA 19-inch rack (rear)
  • Output Current Limitation: Adjustable 0 – 110%
  • Output Transient Response & Recovery: 20 – 100% load charge, with battery connected, does not exceed ± 6%. Does not activate high voltage alarm
  • Output Ripple & Electrical Noise: Standard filtering on battery: 24/48 VDC: 1% V rms, 130 VDC: 2% V rms ; Enhanced filtering / battery eliminator: 24/48/130 VDC: 30 mV rms ; Enhanced filtering / battery eliminator off battery: 24/48 VDC: 30 mV rms, 130 VDC: 100 mV rms
  • Current Ratings: Reverse Current from Battery: Less than 90 mA
  • Voltage Regulation: VAC +10%, -12%: ± 0.25%, 0 – 100% Load: ± 0.25% ; Temp. 32 – 105ºF (0 – 40ºC): ± 0.25% ; Freq. 50 – 60 Hz ± 3 Hz: ± 0.25%
  • Operating Environment: Operating Temperature: 32 – 105ºF (0 – 40ºC), Elevation: 1000 m (3000 ft), Relative Humidity: 0 – 95%
  • Dimensions: By Chassis Type: S1: 483 x 435 x 454 mm (19 x 17 x 18 in), S2: 483 x 657 x 454 mm (19 x 26 x 18 in), S3: 483 x 902 x 456 mm (19 x 35 x 18 in)
  • Audible Noise: Less tan 62 dB (A)
  • Microprocessor / Digital Control
  • SCR Rectification
  • LCD Display and Navigation Pad
  • Advanced Alarming Capabilities
  • Enhanced DC Output Filtering / Battery Eliminator Options
  • Industrial Construction
  • High Reliability, Durability, and Longevity
  • UL Listed and cUL/CSA Certified
  • Designed to Meet NEMA PE5
  • Made in the USA
New call-to-action