GD-3000 Combustible Gas Detector / Controller / Transducer
Eagle Eye
Gas Detection Equipment
PRODUCT DESCRIPTION
The Eagle Eye GD-3000 combustible gas detector is a versatile, easy-to-use device that allows you to select between methane (NG), propane (LP), or hydrogen (H2) gas detection. The GD-3000 provides low-level detection of combustible gas in an easy-to-maintain monitor that is factory calibrated for simple installation. This low voltage combustible gas detector provides automatic feedback and fan control that can help reduce combustible gas concentrations in battery rooms, parking garages, maintenance facilities, and other locations that require combustible gas detection. Our combustible gas indicator can be used with 12VDC or 24VDC N.O. (fire/security) panels.
- Accuracy:±5% of the LEL reading up to 50% LEL
- Alarm: Audible buzzer, output relay 0.5A 200 V, 10 VA
- Alarm Relay Actuation: Selectable N.O. default or N.C.
- Alarm Relay Settings: OFF, 5, 10, 15, 20 (default), 25% LEL
- Current @ 24VDC: 75 mA in alarm (two relays), 50 mA (fan relay only) and 23 mA standby
- Fan Relay: 5 A, 240 VAC, pilot duty, SPDT
- Fan Relay Actuation: Selectable at 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 (default), 11, 12, 13, 14, 15, 16, 17, 18, 19, 20% LEL
- Fan Delay Settings: 0, 1, 3 (default), 5, 10 minutes
- Fan Minimum Run Time: Settings are OFF (default), 3, 5, 10, 15 minutes
- Current Loop: 4 – 20 mA for 0 – 50% LEL
- Current Loop: 4 – 20 mA for 0 – 50% LEL
- Operating Environment: Temperature: -18 – 52 °C / 0 – 125 °F ; Relative Humidity: 10 – 90%
- Power Requirements: 3 W (max) from 12 – 24 VAC, 12 – 48 VDC
- UL Listing: UL 61010-1
- Dimensions / Weight: 114 x 114 x 53 mm (4.5 x 4 x 2.1 in) / 500 g (1 lb)
- Selectable (on/off) digital display, audible alarm buzzer, fan relay (minutes), fan minimum run time
- Selectable fan and alarm relay activation
- Factory Calibrated - Can also be field calibrated using 10% LEL Methane, 10% LEL Propane or 10% LEL Hydrogen gas regulator and calibration hood
- One screw allows access for easy calibration
- Mounts on a standard 4" x 4" electrical box, no cover needed
- 5 A SPDT fan relay controls starters of exhaust fans
- 0.5 A.N.O. or N.C. alarm relay connects to warning devices or control panels
- Supervised system design: internal detector problem will cause the fan & alarm relay to activate
- ETL Listed to UL 61010-1
- GD-3000 can be used with 12VDC or 24VDC N.O. (fire) panels
- Alarm panel provides battery back-up power to GD-3000
- GD-3000 dry contact fan relay can use panel power or fan power
- Match fan relay contacts to fan size, and coil voltage to power source
- Alarm control panels are available with many features and can control other devices such as smoke detectors, fire detectors and burglar alarms
RELATED PRODUCTS FROM
Eagle Eye’s SG-Ultra Digital Hydrometer / Density Meter measures the specific gravity, density and density-related va...
Eagle Eye
Other Equipment & Accessories
The SG-Ultra Max digital hydrometer measures the density and density-related values of your sample within seconds. Re...